EFFECTIVE WIDTH: 6"- 48"
BEGINNING ELEVATION: 7" - 120"
LENGTH: 36" - 240"
ENDING ELEVATION: 7" - 120"
SPEED: 15 - 110 FPM
ROLLER CENTERS: 3", 4", 6"
DRIVE: Standard drive is mounted near the center of the conveyor length on belt
guard side. Up to 20 conveyor rollers can be driven from each side of the drive
roller. Additional drives are required to extend the conveyor length.
FRAME: Standard frame includes 5" channel on chain box side and 3-1/2" channel
on opposite side with roller set high in frame. Optional frame includes 5" channel
on opposite side with roller set low in frame.
MOTOR: 1/2 HP through 2 HP, Energy efficient and inverter duty motors are also
available along with Motorized Drive Rollers (MDR). voltages include 115/1/60,
208/3/60, 230/3/60, 460/3/60 and 575/3/60 along with DC voltages for MDR
ROLLERS: Standard galvanized roller - 1.90" diameter, 16 ga wall tube with 7/16"
hex cold rolled steel axles, spring retained. Standard bearings are ABEC precision,
grease packed. Rollers include Poly-V sleeves for (4) rib belts.
ROLLER COVERS: Optional roller covers include polyurethane roller sleeves,
Ultrex accumulation sleeves.
SUPPORT CENTERS: Standard supports are heavy duty floor supports on 10’
centers. Optional 4" formed channel with jack bolt adjustment.
FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors
include green, beige, gray, orange, black and yellow.
October 9, 2018
LEWCO Unitized Escapement Device
LEWCO recently provided an Automotive Integrator with Gravity Flow Conveyor to m
September 11, 2018
LEWCO PLV19 Collapsing Width Conveyor
The customer was presented with the challenge of ergonomically accessing all fou
August 28, 2018
LEWCO Corrugated Sidewall Belt Conveyor
LEWCO recently provided an automotive tier-1 supplier with Slider Bed Belt Conve
P: 419-625-4014, ext. 4003