BETWEEN FRAMES: 9" - 39"
BEGINNING ELEVATION: 6.75"- 48"
LENGTH: 6" - 1200" see note below in DRIVE
ENDING ELEVATION: 6.75" - 48", Consult factory for incline/decline applications.
ROLLER: 2-1/2" diameter tapered to 1-11/16" diameter, 14 gage galvanized steel
with precision grease packed bearings, 7/16" hex spring retained axles.
ROLLER CENTERS: Nominal 3"
CONVEYOR SPEED: 20 - 250 FPM
DEGREES: 30°, 45°, 90°, 180°
DRIVE BELT: Standard belt is 83A durometer.
DRIVE: 24 volt DC motor with drive spool capable of driving up to (16) rollers
maximum. Conveyors of longer lengths require multiple drive motors. Standard
power supply is 40 amps and is capable of supplying power to up to 40 motors.
CONTROLS: Zero pressure accumulation cards and zone sensor photo eyes
included as standard.
ROLLER COVERS: Standard roller is galvanized steel. Optional polyurethane
FRAME: Conveyor frame is 6.50" high, 12 gage steel channel with bolted cross
SUPPORT CENTERS: Standard supports are floor supports on 10’ centers.
Optional supports on 5’ centers. Ceiling supports are also available.
FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors
include green, beige, gray, orange, black and yellow.
December 12, 2017
LEWCO Enhances Manufacturing Flow for Door Handling with Poly-V System
LEWCO recently provided a door manufacturer with a system of Poly-V Conveyors, P
November 28, 2017
LEWCO Cookware Manufacturer System
LEWCO recently provided a Cookware manufacturer with a system of Heavy Duty Mult
November 14, 2017
Lewco Automotive Seat Delivery System
LEWCO recently provided an Automotive seat manufacturer with a system of Zoned B
P: 419-625-4014, ext. 4003