Steel Hinge Belt Conveyors are available in a variety of configurations (Z, L, P, H) and with a variety of incline angles. Designed for heavy duty use, they are typically configured for use in machining or stamping applications for part or scrap removal.
BELT WIDTH: 8" - 36"
LENGTH OF INCLINE: 52" - 324"
BEGINNING ELEVATION: 8" - 48"
ENDING ELEVATION: 36" - 126"
SPEED: 10 - 45 FPM
INCLINED ANGLE: 30°, 45°, 60°
FEEDER LENGTH: 12" - 120"
NOSEOVER LENGTH: 15" - 120"
BELT: Standard is 2-1/2” pitch steel hinge, dimpled, standard chain with outer side bars. Optional belts are dimpled or perforated, with or without outer side bars. Optional 1-1/2” steel cleats at various center distances are available.
DRIVE: Standard drive is end drive, overhead, right hand side.
MOTOR: 1/2 HP through 1 HP. Energy efficient, inverter duty and brake motors also available. Voltages include 120/1/60, 230/3/60, 460/3/60 and 575/3/60 & DC Voltage.
SUPPORT CENTERS: Standard supports are on nominal 10’ centers.
FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.
November 20, 2018
LEWCO Gravity Conveyor for Automotive Rack Storage
Full Racks are loaded on the infeed end by fork truck. Full rack conveyors have
November 6, 2018
LEWCO - Direct Conveying of Machined Engine Blocks
A system was needed to buffer automotive engine blocks through operator workstat
October 23, 2018
LEWCO Dual Lane Gravity Conveyor for Automotive Rack Storage
A nationally known automotive manufacturer was having trouble accessing the corr
P: 419-625-4014, ext. 4003