Steel Hinge Belt Conveyors are available in a variety of configurations (Z, L, P, H) and with a variety of incline angles. Designed for heavy duty use, they are typically configured for use in machining or stamping applications for part or scrap removal.
BELT WIDTH: 8" - 36"
LENGTH OF INCLINE: 52" - 324"
BEGINNING ELEVATION: 8" - 48"
ENDING ELEVATION: 36" - 126"
SPEED: 10 - 45 FPM
INCLINED ANGLE: 30°, 45°, 60°
FEEDER LENGTH: 12" - 120"
NOSEOVER LENGTH: 15" - 120"
BELT: Standard is 2-1/2” pitch steel hinge, dimpled, standard chain with outer side bars. Optional belts are dimpled or perforated, with or without outer side bars. Optional 1-1/2” steel cleats at various center distances are available.
DRIVE: Standard drive is end drive, overhead, right hand side.
MOTOR: 1/2 HP through 1 HP. Energy efficient, inverter duty and brake motors also available. Voltages include 120/1/60, 230/3/60, 460/3/60 and 575/3/60 & DC Voltage.
SUPPORT CENTERS: Standard supports are on nominal 10’ centers.
FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.
October 23, 2018
LEWCO Dual Lane Gravity Conveyor for Automotive Rack Storage
A nationally known automotive manufacturer was having trouble accessing the corr
October 9, 2018
LEWCO Unitized Escapement Device
LEWCO recently provided an Automotive Integrator with Gravity Flow Conveyor to m
September 11, 2018
LEWCO PLV19 Collapsing Width Conveyor
The customer was presented with the challenge of ergonomically accessing all fou
P: 419-625-4014, ext. 4003