Model PCS19 pneumatic conveyor stop, features a standard 1.9" diameter roller and an optional 3/8" flat bar stop.
BETWEEN FRAMES: 13" - 51"
FRAME DEPTH: 3.5" - 10"
STOP: Standard Roller 1.9" dia., 12 ga. wall tubes with 7/16 hex cold rolled steel
axles, spring retained. Optional 3/8" flat bar stop.
CYLINDER: Double acting 2" bore x 2" stroke pneumatic cylinder.
OPERATION: Extending the cylinder engages the escapement stop.
AIR REQUIREMENTS: Standard requires 30-40psi of clean, filtered, regulated air
at consumption of approximately 0.005 cubic feet per stroke. Optional
VALVE: 24VDC, single solenoid, 2 position, spring return.
FINISH: Standard finish is OSHA safety orange powder.
October 9, 2018
LEWCO Unitized Escapement Device
LEWCO recently provided an Automotive Integrator with Gravity Flow Conveyor to m
September 11, 2018
LEWCO PLV19 Collapsing Width Conveyor
The customer was presented with the challenge of ergonomically accessing all fou
August 28, 2018
LEWCO Corrugated Sidewall Belt Conveyor
LEWCO recently provided an automotive tier-1 supplier with Slider Bed Belt Conve
P: 419-625-4014, ext. 4003