Model MDRB is a medium duty roller bed belt conveyor. Due to the low friction roller bed, it's capable of moving heavier loads with less power than typical slider bed belt conveyors.
BELT WIDTH: 12", 18", 24", 30", 36" 42" 48"
LENGTH: 60" - 1200"
BEGINNING ELEVATION: 6.75" - 126"
ENDING ELEVATION: 6.75" - 126"
SPEED: 15 - 200 FPM
ROLLER CENTERS: 3", 4.5", 6"
ROLLERS: 1.9" diameter, 16ga wall tubes with 7/16" hex cold rolled steel axle
spring retained. Precision grease packed bearings.
BELT: Standard is Trackmate 120 EMB embossed cover with clipper lace.
Optional belts include Trackmate rough top, Trackmate friction cover, Trackmate
longitudinal groove, food grade white PVC & plied rubber slip top. Other belt
DRIVE: Standard drive is an End drive, right hand side. Optional drives include
End drive left hand side, Side drive right or left hand side, or Center drive right or
left hand side.
MOTOR: 1/2 HP through 2 HP. Energy efficient, inverter duty & brake motors
also available. Voltages include 120/1/60, 230/3/60, 460/3/60, 575/3/60 & DC
SUPPORT CENTERS: Standard supports are floor supports on 10’ centers.
Optional floor supports on 5’ centers; ceiling supports on 5' & 10'centers.
GUARDRAIL: Optional 2.5", 4.0" & 6.0"; 12ga bolt on channel.
FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors
include green, beige, gray, orange, black and yellow.
November 14, 2017
Lewco Automotive Seat Delivery System
LEWCO recently provided an Automotive seat manufacturer with a system of Zoned B
October 31, 2017
Lewco Retail E-Commerce Distribution Parcel Belt Conveyor
LEWCO recently provided an integrator with a series of conveyors from our LEWCO
October 17, 2017
Robotic Palletizer System Utilizing LEWCO Professional Grade Pallet Handling Conveyors
A robotic palletizing integrator needed a pallet handling conveyor system for mo
P: 419-625-4014, ext. 4003