LEWCO manufactures 1.9” diameter 12ga wall gravity roller conveyors ideal for applications that require an economical, non-powered means for conveying material. The 1912 roller in this conveyor is a sturdy roller that is a step up in robustness compared to a 1916 roller (16ga wall).
For vertical lifts of more than a few inches, LEWCO designed a pneumatic lift to cost-effectively raise and lower the load. The carriage is guided in linear bearings to maintain stability, and the pneumatic controls can be fine-tuned as needed for smooth operation.
Simple in concept and elegant in execution, this small gravity over-under loop features non-powered anti-backup and anti-falloff stops. The customer preferred a gravity conveyor for this process due to the short length and variety of operations performed on each product. Pneumatic lifts at each end take the empty pallets to and from the sloped lower return line. Roller beds on the lifts are articulated to perfectly match the return line slope, resulting in a very smooth and quiet operation.
October 9, 2018
LEWCO Unitized Escapement Device
LEWCO recently provided an Automotive Integrator with Gravity Flow Conveyor to m
September 11, 2018
LEWCO PLV19 Collapsing Width Conveyor
The customer was presented with the challenge of ergonomically accessing all fou
August 28, 2018
LEWCO Corrugated Sidewall Belt Conveyor
LEWCO recently provided an automotive tier-1 supplier with Slider Bed Belt Conve
P: 419-625-4014, ext. 4003