Model NPTG25 non-powered gravity conveyor turntable provides a transition that can be used in a pass thru conveyor line. The transition section can be reconfigured to make 90° turns at the intersection of two gravity conveyor lines.
BETWEEN FRAMES: 27", 33", 39", 45", 51", 55", 57", 61"
ELEVATION: 13.0" - 36.0"
ROTATION: 360 degrees with spring loaded detents at 90 degree increments.
ROLLER CENTERS: 4-1/2"
ROLLERS: 2.5” diameter, 11ga wall tube or 2.625" diameter, 7ga wall tube. All rollers with 11/16” hex cold rolled steel axles, spring retained. Standard bearings are precision, grease packed.
TURNTABLE PLATE: Standard is 1/2" plate with slewing ring center bearing.
ROLL COVERS: Optional orange polyurethane, 1/8" wall or galvanized tube for 2.5" diameter roller.
TRANSITION ROLLERS: Standard set for pass through conveyor line. Optional transition section can be configured for 90 turns.
FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.
January 9, 2018
LEWCO Small Parcel RED Conveyor
LEWCO recently provided an integrator with a series of conveyors from our LEWCO
December 26, 2017
LEWCO U-Shaped Dunnage System
LEWCO recently supplied an automotive manufacturer with a U-Shaped Dunnage syste
December 12, 2017
LEWCO Enhances Manufacturing Flow for Door Handling with Poly-V System
LEWCO recently provided a door manufacturer with a system of Poly-V Conveyors, P
P: 419-625-4014, ext. 4003