BETWEEN FRAMES: 9" - 39"
BEGINNING ELEVATION: 18."- 48"
CONVEYOR LENGTH: 36" - 72"
ENDING ELEVATION: 18" - 48"
ROLLER: 1.9" diameter, 16 gage galvanized tube with 7/16" hex, cold rolled steel
axle, spring retained with precision ABEC1 bearings.
ROLLER CENTERS: 3"
CONVEYOR SPEED: 20 - 250 FPM
DRIVE BELT: Standard belt is 83A durometer.
DRIVE: 24 volt DC motor with drive spool capable of driving up to (16) rollers
maximum. Conveyors of longer lengths require multiple drive motors. Standard
power supply is 40 amps and is capable of supplying power to up to 40 motors.
CONTROLS: Zero pressure accumulation cards and zone sensor photo eyes
included as standard.
ROLLER COVERS: Standard roller is galvanized steel. Optional polyurethane
FRAME: Conveyor frame is 8.50" high, 12 gage steel channel with bolted cross
SUPPORT CENTERS: Standard supports are floor supports on 10’ centers.
Optional supports on 5’ centers. Ceiling supports are also available.
FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors
include green, beige, gray, orange, black and yellow.
October 23, 2018
LEWCO Dual Lane Gravity Conveyor for Automotive Rack Storage
A nationally known automotive manufacturer was having trouble accessing the corr
October 9, 2018
LEWCO Unitized Escapement Device
LEWCO recently provided an Automotive Integrator with Gravity Flow Conveyor to m
September 11, 2018
LEWCO PLV19 Collapsing Width Conveyor
The customer was presented with the challenge of ergonomically accessing all fou
P: 419-625-4014, ext. 4003