Model LSTRC19 is a line shaft belt driven live roller curve that can provide positive drive for negotiating 90, 60, 45, and 30 degree turns. Used in light and medium duty applications, the tapered rollers help maintain product orientation through the curve.
BETWEEN FRAMES: 13" - 39" See chart below.
BEGINNING ELEVATION: 12.25" - 126" DEGREES: 30°, 45°, 60°, 90°, 180°
ENDING ELEVATION: Same as beginning elevation. Consult factory for incline/decline operations.
ROLLER: 2-1/2" diameter tapered to 1-11/16" diameter, 14ga galvanized steel with precision grease packed bearings, 7/16" spring retained hex axle. Tangent sections use 1.9" diameter, 16ga galvanized steel with precision grease packed bearings, 7/16" spring retained hex axle.
ROLLER CENTERS: Nominal 3"
CONVEYOR SPEED: 20 - 180 FPM
DRIVE BELT: Standard belt is 83A, 15 lb. capacity per roller. Optional high tension
belt is 85A, 25 lb. capacity per roller. Consult Factory for high tension applications.
DRIVE: Driven by LSLR19.
ROLLER COVER: Standard galvanized roller. Optional polyurethane sleeves.
FRAME: 7.5" x 1.50" x 12 ga. Standard bolt-on cross members and welded
SUPPORT CENTERS: Standard (3) supports included per 90° curve. (5) supports inclided per 180° curve, (2) supports included per other angle options.
FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors
include green, beige, gray, orange, black and yellow.
October 9, 2018
LEWCO Unitized Escapement Device
LEWCO recently provided an Automotive Integrator with Gravity Flow Conveyor to m
September 11, 2018
LEWCO PLV19 Collapsing Width Conveyor
The customer was presented with the challenge of ergonomically accessing all fou
August 28, 2018
LEWCO Corrugated Sidewall Belt Conveyor
LEWCO recently provided an automotive tier-1 supplier with Slider Bed Belt Conve
P: 419-625-4014, ext. 4003