Model LSSP19 is a line shaft belt driven live roller conveyor used to divert off main trunk line conveyors at a 30 angle.
BETWEEN FRAMES: 13" - 39"
BEGINNING ELEVATION: 12.25" - 126"
LENGTH: See page 2 of the PDF Download (below the image on the left)
ENDING ELEVATION: Same as beginning elevation. Consult factory for incline/decline applications.
ROLLER: 1.9" diameter, 16ga tube with 7/16" hex, cold rolled steel axle, spring retained with precision ABEC1 bearings.
ROLLER CENTERS: 3"
CONVEYOR SPEED: 20 - 180 FPM
DRIVE BELT: Standard belt is 83A, 15 lb. capacity per roller. Optional high tension belt is 85A, 25 lb. capacity per roller. Consult Factory for high tension applications.
DRIVE: Standard driven by LSDR19, from the conveyor beyond the spur. Optional slave driven from the main conveyor (Option part number LSSPS19).
ROLLER COVER: Standard galvanized roller.
FRAME: 7.5" x 1.50" x 12 ga. Standard bolt-on cross members, and weled end couplers.
SUPPORT CENTERS: Standard supports are two floor supports. Optional ceiling supports are also available.
FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.
ORDER SEPARATELY: Diverter or Plow Arm with low friction face.
July 10, 2018
LEWCO HD CDLR35 Conveyor in 350°F Oven
A LEWCO customer had an existing 350°F oven for curing bricks. The old system
June 26, 2018
LEWCO Gantry Loaded Machining Cell Conveyor System
LEWCO recently provided an automotive tier-1 supplier with Chain Driven Live Rol
June 12, 2018
LEWCO E-Commerce Parcel Distribution System
LEWCO recently provided an integrator with a series of conveyors from our LEWCO
P: 419-625-4014, ext. 4003