Model LSHG19 manually operated hinged gate provides convenient, economical passageway for personnel or equipment to either side of a conveyor line.
BETWEEN FRAMES: 13" - 39"
BEGINNING ELEVATION: 18" - 42"
CONVEYOR LENGTH: 60", 72"
ENDING ELEVATION: Same as beginning elevation. Consult factory for incline/decline operations.
ROLLER: 1.9" diameter, 16ga tube with 7/16" hex, cold rolled steel axle, spring retained with precision ABEC1 bearings.
ROLLER CENTERS: Nominal 3" CONVEYOR SPEED: 20 - 180 FPM
DRIVE BELT: Standard belt is 83A, 15 lb. capacity per roller. 75 lb unit load. Optional high tension belt is 85A, 25 lb. capacity per roller. Consult Factory for high tension applications.
DRIVE: Driven by LSDR19.
ROLLER COVER: Standard galvanized roller. Optional polyurethane sleeves available.
FRAME: 7.50" x 1.50" x 12 ga. Standard bolt-on cross members and welded end couplers at infeed.
SUPPORT CENTERS: Standard supports are floor supports on each end of infeed conveyor. Optional ceiling supports are also available.
FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.
October 9, 2018
LEWCO Unitized Escapement Device
LEWCO recently provided an Automotive Integrator with Gravity Flow Conveyor to m
September 11, 2018
LEWCO PLV19 Collapsing Width Conveyor
The customer was presented with the challenge of ergonomically accessing all fou
August 28, 2018
LEWCO Corrugated Sidewall Belt Conveyor
LEWCO recently provided an automotive tier-1 supplier with Slider Bed Belt Conve
P: 419-625-4014, ext. 4003