2.5" Diameter 11 ga. Gravity Roller Curves are used to provide smooth product flow through turns. Curves will convey products with minimum degree of pitch based on weight and size. Optional guard rails may be added for product protection.
BETWEEN FRAMES: 6" - 61"
DEGREE: 90 , 45 , 30
ROLLERS: 2511 Roller - 2.5" dia., 11ga wall tubes. 2607 Roller - 2.625" dia., 7ga
wall tubes. Both rollers have 11/16" hex cold rolled steel axle, spring retained.
Standard A50 bearings are light oil lubricated. Optional bearings include
combinations of precision, semi-precision and non-precision construction with
light oil or grease packed lubrication. 750 lbs roller capacity.
FRAMES: Standard FC96 set high 4" x 1-1/2" x 8ga formed steel channel with
bolted 2" x 8ga galvanized angle crossties. Optional frames include FC19 channel
5" & 4" x 1-1/2" x 8ga set high and low or FC39 channel 5'' x 1-1/2'' x 8ga set low.
ROLLER SURFACE: Optional Orange Polyurethane, 1/8" wall or galvanized tube.
COUPLINGS: Bolted butt couplers standard on both ends of channel.
FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors
include green, beige, gray, orange, black and yellow.
November 20, 2018
LEWCO Gravity Conveyor for Automotive Rack Storage
Full Racks are loaded on the infeed end by fork truck. Full rack conveyors have
November 6, 2018
LEWCO - Direct Conveying of Machined Engine Blocks
A system was needed to buffer automotive engine blocks through operator workstat
October 23, 2018
LEWCO Dual Lane Gravity Conveyor for Automotive Rack Storage
A nationally known automotive manufacturer was having trouble accessing the corr
P: 419-625-4014, ext. 4003