2.5" O.D. x 14 ga. Gravity Roller Curves are used to provide smooth product flow through turns. Curves will convey products with minimum degree of pitch based on weight and size. Optional guard rails may be added for product protection.
BETWEEN FRAMES: 6" - 51"
DEGREE: 90 , 45 , 30
ROLLERS: 2.5" dia., 14ga wall tubes with 7/16" hex cold rolled steel axle, spring
retained. Standard A40 bearings are light oil lubricated. Optional A41 bearings are
greased. 290 lbs roller capacity.
FRAMES: Standard FC97 set high 3-1/2" x 1-1/2" x 12ga formed steel channel
with bolted 2" x 8ga galvanized angle crossties. Optional frame include FC38
channel, 4-1/2" x 1-1/2" x 12ga set low.
ROLLER SURFACE: Optional Orange Polyurethane, 1/8" wall.
COUPLINGS: Bolted butt couplers Standard on both ends of channel.
FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors
include green, beige, gray, orange, black and yellow.
November 20, 2018
LEWCO Gravity Conveyor for Automotive Rack Storage
Full Racks are loaded on the infeed end by fork truck. Full rack conveyors have
November 6, 2018
LEWCO - Direct Conveying of Machined Engine Blocks
A system was needed to buffer automotive engine blocks through operator workstat
October 23, 2018
LEWCO Dual Lane Gravity Conveyor for Automotive Rack Storage
A nationally known automotive manufacturer was having trouble accessing the corr
P: 419-625-4014, ext. 4003