1.9" Diameter 16 ga. Gravity Roller Spurs are used to divert off, or merge on, main trunk line conveyors at various angles. They are often used when several lines transfer onto a main conveyor line, from work stations or similar applications.
BETWEEN FRAMES: 13" - 51" (See chart)
LENGTH: 28" - 106" (See chart)
ROLLER CENTERS: 3", 4.5", 6"
DEGREE: 30 , 45 (See chart)
ROLLERS: 1.9" dia., 16ga wall tubes with 7/16" hex cold rolled steel axles, spring
retained. Standard bearings are light oil lubricated. Optional bearings include
combinations of precision, semi-precision, and non-precision construction with
light oil or grease packed lubrication.
FRAMES: Standard F97 set high 3-1/2" x 1" x 12ga formed steel channel with
bolted 2" x 8ga galvanized angle crossties. Optional F38 set low 4-1/2" x 1-1/2" x
ROLLER SURFACE: Optional Orange Polyurethane, 1/8" wall or galvanized tube.
COUPLINGS: Bolted butt couplers standard on one end of channel.
FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors
include green, beige, gray, orange, black and yellow.
November 20, 2018
LEWCO Gravity Conveyor for Automotive Rack Storage
Full Racks are loaded on the infeed end by fork truck. Full rack conveyors have
November 6, 2018
LEWCO - Direct Conveying of Machined Engine Blocks
A system was needed to buffer automotive engine blocks through operator workstat
October 23, 2018
LEWCO Dual Lane Gravity Conveyor for Automotive Rack Storage
A nationally known automotive manufacturer was having trouble accessing the corr
P: 419-625-4014, ext. 4003