1.9" Diameter 12 ga. Gravity Roller Curves are used to provide smooth product flow through turns. Curves will convey products with minimum degree of pitch based on weight and size. Optional guard rails may be added for product protection. The 1912 roller in this conveyor is a sturdy roller that is a step up in robustness compared to a 1916 roller.
BETWEEN FRAMES: 6" - 51"
DEGREE: 90 , 45 , 30
ROLLERS: 1909 Roller - 9ga wall tube. 1912 Roller - 12ga wall tube. 1916 Roller -
16ga wall tube. All rollers 1.9" dia., with 7/16" hex cold rolled steel axles, spring
retained. Standard bearings are light oil lubricated. Optional bearings include
combinations of precision, semi-precision, and non-precision construction with
light oil or grease packed lubrication.
FRAMES: Standard FC97 set high 3-1/2" x 1-1/2" x 12ga formed steel channel
with bolted 2" x 8ga galvanized angle crossties. Optional frame include FC38
channel, 4-1/2” x 1-1/2” x 12ga set low.
ROLLER SURFACE: Optional Orange Polyurethane, 1/8" wall or galvanized tube.
COUPLINGS: Bolted butt couplers standard on both ends of channel.
FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors
include green, beige, gray, orange, black and yellow.
October 23, 2018
LEWCO Dual Lane Gravity Conveyor for Automotive Rack Storage
A nationally known automotive manufacturer was having trouble accessing the corr
October 9, 2018
LEWCO Unitized Escapement Device
LEWCO recently provided an Automotive Integrator with Gravity Flow Conveyor to m
September 11, 2018
LEWCO PLV19 Collapsing Width Conveyor
The customer was presented with the challenge of ergonomically accessing all fou
P: 419-625-4014, ext. 4003