1-3/8 in. Dia. Gravity Roller Spurs are used to divert off, or merge on, main trunk line conveyors at various angles. They are often used when several lines transfer onto a main conveyor line, from work stations or similar applications.
BETWEEN FRAMES: 10" - 22" (See chart)
LENGTH: 24" - 57" (See chart)
ROLLER CENTERS: 1.5", 3", 4.5", 6"
DEGREE: 30 , 45 (See chart)
ROLLERS: 1.375" dia., 18 ga. wall galvanized tubes with 1/4" round cold rolled
steel axles, spring retained. Standard A02 bearings are light oil lubricated. 50 lbs.
FRAMES: Standard F98 set high 2-1/2" x 1" x 12ga formed steel channel with
bolted 1-1/8" x 12ga angle crossties. Optional F33 set low 3-1/2" x 1" x 12ga.
ROLLER SURFACE: Standard galvanized tube. Optional roll covers includes
Orange Polyurethane, 1/8" wall.
COUPLINGS: Standard Hooks on one end.
FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors
include green, beige, gray, orange, black and yellow.
October 9, 2018
LEWCO Unitized Escapement Device
LEWCO recently provided an Automotive Integrator with Gravity Flow Conveyor to m
September 11, 2018
LEWCO PLV19 Collapsing Width Conveyor
The customer was presented with the challenge of ergonomically accessing all fou
August 28, 2018
LEWCO Corrugated Sidewall Belt Conveyor
LEWCO recently provided an automotive tier-1 supplier with Slider Bed Belt Conve
P: 419-625-4014, ext. 4003