Model PUBS2 pop up blade stop can be used to hold product on a gravity conveyor line prior to a work area. It can also be used with an RB or RBB roller brake as part of an escapement mechanism.
BETWEEN FRAMES: 21" - 61"
MOUNTING: Escapement frame bolts on to webs of conveyor frame.
BLADE STOP: 3/8" plate connected to air cylinder.
OPERATION: Extending the cylinders engages the escapement stop.
CYLINDERS: Two double acting 2" bore x 2" stroke pneumatic cylinders.
AIR REQUIREMENTS: Standard requires 30-40psi of clean, filtered, regulated air
at consumption of approximately 0.005 cubic feet per cycle. Optional valve and
FINISH: Standard finish is OSHA safety orange powder.
October 9, 2018
LEWCO Unitized Escapement Device
LEWCO recently provided an Automotive Integrator with Gravity Flow Conveyor to m
September 11, 2018
LEWCO PLV19 Collapsing Width Conveyor
The customer was presented with the challenge of ergonomically accessing all fou
August 28, 2018
LEWCO Corrugated Sidewall Belt Conveyor
LEWCO recently provided an automotive tier-1 supplier with Slider Bed Belt Conve
P: 419-625-4014, ext. 4003