The Model T03C25 is a chain roller conveyor with integral pneumatic actuated pop-up chain transfer similar to T01C25 except for handling up to 4,000 pound loads. Transfer chains are kept within the effective width of the CDLR. This rugged design is ideal for transferring pallets and containers with bottoms capable of conveying at right angles over the small gap that exists because of the conveyor side frame rail.
EFFECTIVE WIDTH (EW): 31" to 61"
ELEVATION: 12" top of roller minimum
LENGTH(LG) : 60" to 120"
NUMBER OF STRANDS (NS): 2, 3 or 4
SPEED: 30 - 60 Feet Per Minute
ROLLER CENTERS (RC): 4", 4-1/2", 6" CHAIN CENTERS (TC): 12" to 48"
MOTOR: 3/4 HP through 1 HP. Energy efficient and inverter duty motors also available. Voltages include 120/1/60, 230/3/60, 460/3/60, 575/3/60 & DC Voltage.
ROLLER BEARING: Precision ABEC style with 11/16" hexagon axle
CHAIN: #C60, single pitch flat top conveyor chain, 3/4" pitch
AIR REQUIREMENTS: Transfer lift is pneumatically actuated, requires approximately 0.10 Ft³ of 60 PSI air per lift cycle. Includes FLR unit and (2) position double solenoid valve, 120 volt AC or 24 volt DC coils.
ELECTRICAL REQUIREMENTS: Includes up and down position proximity switches, 20 to 250 volt AC/DC, prewired and terminated in 6” square junction box on outside of conveyor frame. Photo-eye sensor available as option for product detection.
STOP: Fixed or retractable product stops available as an option
ROLLER COVER: Standard roller finish is carbon steel. Options for galvanized steel, urethane covers, or Ultrex accumulation sleeves also available
SUPPORTS: Minimum top of roller elevation is 12”, supports available for up to 48” elevation
FRAME FINISH: Standard finish is OSHA safety blue. Optional colors include green, beige, gray, orange, black and yellow
January 9, 2018
LEWCO Small Parcel RED Conveyor
LEWCO recently provided an integrator with a series of conveyors from our LEWCO
December 26, 2017
LEWCO U-Shaped Dunnage System
LEWCO recently supplied an automotive manufacturer with a U-Shaped Dunnage syste
December 12, 2017
LEWCO Enhances Manufacturing Flow for Door Handling with Poly-V System
LEWCO recently provided a door manufacturer with a system of Poly-V Conveyors, P
P: 419-625-4014, ext. 4003