Model BDR19N is a narrow belt drive, minimum pressure accumulation conveyor with an economical design well suited for accumulation of light weight loads. The narrow belt allows options for smaller between frame widths than the standard BDLR19 conveyor.
BETWEEN FRAMES: 13" - 39"
LENGTH: 60" - 480"
BEGINNING ELEVATION: 18" - 72"
ENDING ELEVATION: 18" - 72"
SPEED: 30, 40, 50, 60, 90, 200 FPM
ROLLER CENTERS: 3", 4", 6"
BELT: 1-1/4” wide 3 ply power transmission belt with polyester traction top
DRIVE: Standard drive is center drive, right.
MOTOR: 1/2 HP, Energy efficient and inverter duty motors also available.
Voltages include 120/1/60, 230/3/60, 460/3/60 and 575/3/60 & DC Voltage.
ROLLER: 1.9" diameter 16 gauge tube with 7/16" hex cold rolled steel axle, spring retained with precision bearings. 1.9" diameter 12 gauge and 9 gauge rollers are available as option.
MINIMUM PRESSURE ACCUMALATION: Pressure is set by using adjusting pressure idlers as needed to create minimum pressure drive of carrying surface rollers.
SUPPORT CENTERS: Standard supports are floor supports on 10’ centers. Optional ceiling supports are also available.
FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.
October 9, 2018
LEWCO Unitized Escapement Device
LEWCO recently provided an Automotive Integrator with Gravity Flow Conveyor to m
September 11, 2018
LEWCO PLV19 Collapsing Width Conveyor
The customer was presented with the challenge of ergonomically accessing all fou
August 28, 2018
LEWCO Corrugated Sidewall Belt Conveyor
LEWCO recently provided an automotive tier-1 supplier with Slider Bed Belt Conve
P: 419-625-4014, ext. 4003