Model MDSWM is a flat wire mesh, slider bed belt conveyor used in applications where hot, cold or oil soaked parts are conveyed. It can also be used in drying or cooling applications because the open bed construction allows for free air flow. The conveyor can be used to convey parts up to 400 degrees F.
BELT WIDTH: 12", 18", 24", 30", 36"
LENGTH: 60" - 720"
BEGINNING ELEVATION: 9" - 126"
ENDING ELEVATION: 19" - 126"
SPEED: 15 - 60 FPM
BELT: Standard galvanized with clinched edge. Options include galvanized or
Stainless material with clinched or welded edge.
DRIVE: Standard drive is an end drive, bottom right hand. Optional drives include
end drive, bottom left hand; Side drive right or left hand side.
MOTOR: 1/2 HP through 1-1/2 HP. Energy efficient, inverter duty & brake motors
also available. Voltages include 120/1/60, 230/3/60, 460/3/60, 575/3/60 & DC
SUPPORT CENTERS: Standard supports are floor supports on 10’ centers.
Optional floor supports on 5’ centers; Ceiling supports on 5' & 10’ centers.
GUARDRAIL: Standard is no guardrail. Optional 2.0", 4.0" & 6.0"; 1/4" thickness,
welded on flat.
FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors
include green, beige, gray, orange, black and yellow.
May 28, 2019
LEWCO Product Spotlight Featuring: Turntables
Turntables provide a method of rotating unit loads when material lines intersect
May 14, 2019
LEWCO Product Spotlight Featuring: Ball Tables and Wheel Rail Conveyor
Non-powered roller conveyors are the most economical and common method of convey
April 30, 2019
LEWCO Product Spotlight Featuring: Gravity Conveyors
Non-powered roller conveyors, or Gravity Conveyors, are the most economical and
P: 419-625-4014, ext. 4003