Model MDRWM is a flat wire mesh, roller bed belt conveyor used in applications where hot, cold or oil soaked parts are conveyed. The roller bed design is capable of moving heavier loads with less power, and the open bed construction allows for free air flow, which is ideal for drying or cooling applications. The conveyor can be used to convey parts up to 400 degrees F.
BELT WIDTH: 12", 18", 24", 30", 36"
LENGTH: 60" - 720"
BEGINNING ELEVATION: 9" - 126"
ENDING ELEVATION: 19" - 126"
SPEED: 15 - 60 FPM
ROLLER CENTERS: 6"
ROLLERS: 1.9" diameter, 16ga wall tubes with 7/16" hex cold rolled steel axle
spring retained. Precision grease packed bearings.
BELT: Standard galvanized with clinched edge. Options include galvanized or
Stainless material with clinched or welded edge.
DRIVE: Standard drive is an End drive, Bottom right hand side. Optional drives
include End drive, Bottom left hand side, Side drive right or left hand side.
MOTOR: 1/2 HP through 1-1/2 HP. Energy efficient, inverter duty & brake motors
also available. Voltages include 120/1/60, 230/3/60, 460/3/60, 575/3/60 & DC
SUPPORT CENTERS: Standard supports are floor supports on 10’ centers.
Optional floor supports on 5’ centers.
GUARDRAIL: Standard is no guardrail. Optional 2.0", 4.0" & 6.0"; 1/4"thickness,
welded on flat.
FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors
include green, beige, gray, orange, black and yellow.
November 20, 2018
LEWCO Gravity Conveyor for Automotive Rack Storage
Full Racks are loaded on the infeed end by fork truck. Full rack conveyors have
November 6, 2018
LEWCO - Direct Conveying of Machined Engine Blocks
A system was needed to buffer automotive engine blocks through operator workstat
October 23, 2018
LEWCO Dual Lane Gravity Conveyor for Automotive Rack Storage
A nationally known automotive manufacturer was having trouble accessing the corr
P: 419-625-4014, ext. 4003