Model HDRB25 is a heavy duty roller bed belt conveyor intended for the most extreme applications. The robust combination of belt over heavy duty rollers is ideal in moving heavy loads not conveyable on other types of heavy duty live roller conveyor.
BELT WIDTH: 12", 18", 24", 30", 36", 48", 60", 72"
LENGTH: 60" - 1200"
BEGINNING ELEVATION: 9"- 126"
ENDING ELEVATION: 9" - 126"
SPEED: 15 - 150 FPM
ROLLER CENTERS: 3", 4.5", 6"
ROLLERS: 2.5" diameter, 11ga wall tubes with 11/16" hex cold rolled steel axle
spring retained. Precision grease packed bearings.
BELT: Standard is Trackmate 120 EMB with clipper lacing. Optional belts include
Trackmate rough top, Trackmate friction cover, Trackmate longitudinal groove,
food grade white PVC & plied rubber slip top. Other belt options available.
DRIVE: Standard drive is an end drive, bottom right hand. Optional drives include
end drive, bottom left hand; side drive right or left hand; or center drive right or
MOTOR: 3/4 HP through 2 HP. Energy efficient, inverter duty, brake motors also
available. Voltages include 120/1/60, 230/3/60, 460/3/60, 575/3/60 & DC
SUPPORT CENTERS: Standard supports are floor supports on 5’ centers. Optional
floor supports on 10’ centers.
GUARDRAIL: Optional 4.0" & 6.0"; 8ga bolt on channel
FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors
include green, beige, gray, orange, black & yellow.
November 20, 2018
LEWCO Gravity Conveyor for Automotive Rack Storage
Full Racks are loaded on the infeed end by fork truck. Full rack conveyors have
November 6, 2018
LEWCO - Direct Conveying of Machined Engine Blocks
A system was needed to buffer automotive engine blocks through operator workstat
October 23, 2018
LEWCO Dual Lane Gravity Conveyor for Automotive Rack Storage
A nationally known automotive manufacturer was having trouble accessing the corr
P: 419-625-4014, ext. 4003