LEWCO recently provided a rear axle assembly manufacturer with an over under system to store and fill empty shipping racks. The shipping racks are loaded on the top level empty, when the operator needs an empty rack they push a button and the scissor lift raises up. Once the lift is all the way up to the upper level it releases a stop and the rack is conveyed onto the conveyor on the scissor lift. The scissor lift then lowers the rack down so the operator can fill the rack with completed rear end. Once the rack is full the operator pushes the button to send the rack to the discharge end and the rack is sent to the lower level where it will be unloaded via a fork truck.
This over under system is just one example of the conveyors LEWCO has to offer for a wide variety of applications.
October 9, 2018
LEWCO Unitized Escapement Device
LEWCO recently provided an Automotive Integrator with Gravity Flow Conveyor to m
September 11, 2018
LEWCO PLV19 Collapsing Width Conveyor
The customer was presented with the challenge of ergonomically accessing all fou
August 28, 2018
LEWCO Corrugated Sidewall Belt Conveyor
LEWCO recently provided an automotive tier-1 supplier with Slider Bed Belt Conve
P: 419-625-4014, ext. 4003