Model TC2511 heavy duty manual transfer car allow product to be moved from one lane to another parallel lane within a system. These units are fixed to a set of tracks which facilitate easy movement and positioning in front on the lanes to be loaded or unloaded from the car.
BETWEEN FRAMES: 15" - 61"
LENGTH: 36" - 120"
ROLLER CENTERS: 3", 4", 6", 9", 12"
ROLLERS: 2.5" dia., 11ga wall tubes with 11/16" hex cold rolled steel axle, spring retained. Standard A50 bearings are light oil lubricated. Optional bearings include combinations of precision, semi-precision and non-precision construction with light oil or grease packed lubrication. 750 lbs roller capacity.
FRAMES: Standard F70 set high 5" x 1-1/2" x 12ga formed steel channel with bolted 1-1/8" x 1/8" angle crossties. Optional F71 set low 6" x 1-1/2" x 12ga.
ROLL COVERS: Standard carbon steel. Optional roll covers includes Orange Polyurethane, 1/8" wall or galvanized tube.
CASTERS: 4" cast iron V-groove and 5" phenolic.
HANDLE: 1" pipe with hand grip.
END STOP: Fixed style, near handle.
FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.
September 19, 2017
LEWCO Knife-edge Parcel Belt System
LEWCO recently provided a distributor with a series of incline belt conveyors to
September 5, 2017
LEWCO Heavy Duty Dual Lane Powered Transfer Car
LEWCO recently supplied a commercial wood door manufacturer with a Powered Trans
August 22, 2017
LEWCO Industrial Ovens
In addition to conveyor equipment, did you know LEWCO also manufactures a line o
P: 419-625-4014, ext. 4003