Steel Hinge Belt Conveyors are available in a variety of configurations (Z, L, P, H) and with a variety of incline angles. Designed for heavy duty use, they are typically configured for use in machining or stamping applications for part or scrap removal.
BELT WIDTH: 8" - 36"
LENGTH OF INCLINE: 52" - 324"
BEGINNING ELEVATION: 8" - 48"
ENDING ELEVATION: 36" - 126"
SPEED: 10 - 45 FPM
INCLINED ANGLE: 30°, 45°, 60°
FEEDER LENGTH: 12" - 120"
NOSEOVER LENGTH: 15" - 120"
BELT: Standard is 2-1/2” pitch steel hinge, dimpled, standard chain with outer side bars. Optional belts are dimpled or perforated, with or without outer side bars. Optional 1-1/2” steel cleats at various center distances are available.
DRIVE: Standard drive is end drive, overhead, right hand side.
MOTOR: 1/2 HP through 1 HP. Energy efficient, inverter duty and brake motors also available. Voltages include 120/1/60, 230/3/60, 460/3/60 and 575/3/60 & DC Voltage.
SUPPORT CENTERS: Standard supports are on nominal 10’ centers.
FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.
September 19, 2017
LEWCO Knife-edge Parcel Belt System
LEWCO recently provided a distributor with a series of incline belt conveyors to
September 5, 2017
LEWCO Heavy Duty Dual Lane Powered Transfer Car
LEWCO recently supplied a commercial wood door manufacturer with a Powered Trans
August 22, 2017
LEWCO Industrial Ovens
In addition to conveyor equipment, did you know LEWCO also manufactures a line o
P: 419-625-4014, ext. 4003