Lewco, Inc Material Handling & Process Heating

Roller Centers: 4.00” with 40A21 sprockets; 4.50” with 60A15 sprockets; 5.00” with 50A19 sprockets; 6.00” with 60A16 sprockets; 7.50” with 60A16 sprockets; 12.00” with 60A16 sprockets.
Effective Widths: 13”, 19”, 25”, 31”, 37”, 43”, 49”, 54”, 57” and 61”. Also Available from 6” to 61” in 1” increments.
Lengths: Even increments of the roller centers up to 75’. Length also limited to 75 rollers on each side of the drive.
Standard Zones: 60” Long. Also available from 48” to 72” in increments equal to the roller centers. Each zone is controlled by one sensor with self contained logic.
Drive: Standard D16 - side, bottom, near center with live axle drive roller. Drive has cast iron worm gear speed reducer with a standard M03 3/4 H.P. 230/460 TEFC motor.
Electrical Requirements: 24v control voltage in addition to selected motor voltage.
Speed: Standard 30 feet per minute. Also available from 1 to 120 feet per minute.
Rollers: Standard 2607; 2.625 dia., 7 ga. wall tubes with 11/16 hex cold rolled steel axle, spring retained. Standard A51 bearings are grease packed.
Frames: Standard F78 6” deep x 3/16” formed steel on chain box side, 4” x 1-1/2” x 3/16” channel rollers set high on idler side with bolted 5” x 1-1/2” x 3/16” crosstie.
Chain Covers: 1/8” steel with two piece construction for easy access to chain loops.
Pneumatic Clutch: A Standard Ball bearing pilot, end of shaft mount, multiple drive clutch.
Air Requirement: 80 PSI
Supports: SPHH style adjustable set for standard 36” top of rollers located on nominal 5’ centers. Also available from 11” to 42” top of roller at no additional charge.
Capacity: Up to 1,000 lbs. per lineal foot of conveyor with supports on 5’ centers. Several factors affect conveyor capacity. Consult factory to evaluate specific applications.
Guard Rails: Standard G99: No Guard Rail.
Roll Covers: Standard V98: No Roll Cover.
Finish: Standard PP94: Safety Blue, Epoxy Powder Coat.

OPTIONAL COMPONENTS (Click for description)
DRIVE	D16; D10; D11; D12; D13; D14; D15; D17; D18; D99
FRAME	F78; F79
GUARD RAIL	G99; GC; G36; G37; G38; G39; G40
MOTOR	M03; M01; M02; M04; M05; M06; M07; M08; M09; M10; M11; M12; M13; M14; M15; M16; M17; M19; M20; M21; M22; M23; M24; M25; M26; M27; M30; M31; M32; M33; M34; M97; M98; M99
ROLLER BEARING	A51; A53; A55
ROLL COVER	V98; V11; V42
SUPPORT CENTER	SCC5; SCC0; SCC10
FINISH	PP94; PP09; PP11; PP24; PP45; PP95

HOW TO ORDER

CDZA26 - EW - RC - LG - SP - LGZONE - BE - EE- DRIVE - FRAME - GDRAIL - MOTOR- RLBRG - ROLCV - SUPCC - FINISH

EXAMPLE: CDZA25 - 13 - 4 - 120- 30 - 60 - 36 - 36 - D16 - F78 - G99 - M03 - A51 - V98 - SCC5 - PP94